DNF Controls 4040CL-EVS-PBIO - Manual (Page 15)

4040CL-EVS-PBIO, 300 Clip Fast Access System, EVS DDRs Page 15 of 26
PARAMETER DESCRIPTION
RECORD KEY Select single button or 2-button record:
RECORD = [REC] Only
OR RECORD = [REC] + [PLAY]
RECALL
MODE Press [NORMAL] or [REDIR] (redirect).
REDIR-
When one and only one clip is learned into a Cue Point, the Clip will be REDIRECTED to load
on the currently selected VTR
NORMAL-
The cue point will load on the learned VTR.
PREROLL Enter Preroll value.
RECORD
DELAY Enter delay value. (Used by CAPTURE function.)
GANG
MODE [PERM] Permanent Gang-
The GANG can be created and undone only with the [GANG] softkey.
[TEMP] Temporary Gang-
Quickly create a GANG by pressing and holding a VTR key, then pressing other VTR keys.
Quickly undo the GANG by pressing any VTR key.
STANDARD Press [NTSC] or [PAL] to select the video standard for time calculations.
LABEL
MODE Press [ON] or [OFF]. (See LABEL section for description.)
ON-
Display a user-entered LABEL instead of the actual CLIP ID.
OFF-
Display actual CLIP ID.
CLEAR
MEM
[DEFAULTS] [CLR – CUES] [CLR – BANK] [BACK]
DEFAULTS
Set ST400 to factory defaults. Follow the prompts on the display.
Press [YES] to continue or press [NO] to exit without changing ST400.
CLR – BANK
Clears all cue points in the selected bank. Follow the prompts on the display.
CLR – CUES
Clears all cue points in all banks. Follow the prompts on the display.
BACK
Return to prior menu item.