DR Power 6000-Watt Generator - Manual (Page 25)

CALL TOLL FREE 1-800-DR-OWNER 21
Grounding the Generator
The National Electrical Code requires that the frame and external electrically conductive parts of this
Generator be properly connected to an approved earth ground. Local electrical codes may also require
proper grounding of the Generator. For that purpose, an EXTERNAL GROUND fastener is provided on the
Generator (Figure 32).
Generally, connecting a #12 AWG copper wire to the EXTERNAL GROUND fastener and then to an earth-
driven copper or brass grounding-rod provides adequate protection against electrical shock. However, local
codes may vary; consult with a local electrician for grounding requirements in your area.
Properly grounding the Generator helps prevent electrical shock if a ground fault condition exists in the
Generator or in connected appliances. Proper grounding also helps dissipate static electricity, which often
builds up in ungrounded devices. A Ground Fault Circuit Interrupter (GFCI) is provided in the 125VAC
receptacles on the Generator front panel (Figure 30).
Figure 32