Step 9: connect the battery wires – DR Power Sprint (1985 - 2000) User Manual

Page 15

Advertising
background image

DR

®

TRIMMER/MOWER

Assembly & Operating Instructions

9

Step 9: Connect the Battery Wires

(Electric-Starting models only)

To prevent the battery from discharging
during shipment, all electric-starting
trimmers are shipped with the black, negative
battery wire disconnected. Connect the two
black wires by pushing the plastic ends
together (Figure 12). See the red wires for
comparison. The wires are located on the left
front side when standing in the operator's
position.

Figure 12

Advertising