DR Power Hydraulic 8-Ton - Manual (Page 30)

30 8-TON DR ® WOOD SPLITTER
8. Position the Wood Splitter behind the vehicle with the
engine of your Wood Splitter on the right-hand side
(Figure 40).
NOTE: The end of the Receiver Bar that inserts into your vehicle
hitch features a dual-height positioner. By turning the Bar 180˚ (up
or down) in the vehicle hitch, your Wood Splitter can be oriented in
a high or low position (Figure 41). Use the HIGH position when
transporting your Wood Splitter, and use either the HIGH or LOW
position when splitting wood.
9. Lift the end of the Receiver Bar and start it into the
Vehicle Hitch (Figure 42).
Class ll
Receiver
Figure 42
Receiver
Bar
Receiver
Bar
Figure 40
Receiver
Hitch
High Position
Figure 41
Receiver
Bar
Vehicle
Hitch
Low Position
THE WOOD SPLITTER WITH THE RECEIVER MOUNT
ACCESSORY WEIGHS APPROXIMATELY 160 LBS. WE
RECOMMEND TWO PEOPLE FOR THIS NEXT OPERATION.