DR Power Hydraulic 22-Ton User Manual
Page 12
12
DR
®
22-TON VERTICAL/HORIZONTAL WOOD SPLITTER
Tools needed:
• Hammer and pry bar
• Utility knife
• 10" crescent wrench
• Ratchet
• 1/2" open end wrench
• 1/2" socket
• 3/4" open end wrench
• 3/4" socket
• Funnel
• Pliers
• Band Cutters
Supplies needed:
• Pipe sealant tape
• Hydraulic fluid (see “specifications”, page 3)
• Engine oil (see engine manual)
• General purpose grease
Shipping List
The following chart contains the list of parts that should be shipped as part of the
DR 22-TON VERTICAL/HORIZONTAL WOOD SPLITTER.
D
ESCRIPTION
Q
TY
D
ESCRIPTION
Q
TY
Base Unit (engine)
1
1
Rail Latch Assembly
Rail Unit (hydraulic cylinder)
1
1
Rail Latch Assembly
1
1
Hydraulic Fluid Filter
2
1
Bolts (1/2-13 x 1-1/2 inch)
2
2
Hitch Assembly Parts
Lock Washers (1/2 inch)
2
2
Hitch Assembly (2 inch)
2
1
Nuts (1/2-13)
2
2
Bolt (1/2-13 x 3-1/2 inch)
2
2
Valve Assembly
Locknuts (1/2-13)
2
2
Control Lever (valve)
2
1
Safety Chains
2
2
Knob (valve lever)
2
1
Safety Link
2
1
Valve Link
2
1
Tongue and Front Leg Assembly
Clevis Pins
2
3
Tongue and Front Leg Weldment
1
1
Cotter Pins
2
3
Bolts (1/2-13 x 3-1/2 inch)
2
2
Fender Assembly
Lock Washers (1/2 inch)
2
2
Fenders
2
2
Nuts (1/2-13)
2
2
Bolts (5/16-18 x 3/4 inch)
2
4
Rail to Base Assembly
Locknuts (5/16-18)
2
4
Bolts (1/2-13 x 1-1/2 inch)
2
2
Lock Washers (1/2 inch)
2
2
Nuts (1/2-13)
2
2
1
On the pallet.
2
In cardboard box.