DR Power Hydraulic 22-Ton - Manual (Page 17)

Contact us at www.DRpower.com 17
11. Link the ends of safety chains together with the safety
quick-link and tighten the link’s locknut securely with
a wrench (Figure 13).
12. Place the hitch over the attachment tube, aligning the
bolt holes, and insert the rear 1/2-13 x 3 inch bolt (A).
Install and tighten the locknut (Figure 14).
13. Insert the large end of the safety chain quick-link into
the front tube of the rail assembly and insert a 1/2-13
x 3 inch bolt (B) through the hitch and link. Install and
tighten the locknut.
14. Install the valve link onto the valve body (Figure 15)
using a 1/4 x 1 inch long clevis pin (install clevis pin
from the top). Secure the clevis pin with a cotter pin
(bend the ends of the cotter pin to make it secure).
Figure 13
Safety
Quick-Link
Safety
Chains
Figure 14
Hitch
Install Inside
of Hitch and
Rail
A
B
Safety
Chains
Figure 15
Valve
Link
Clevis Pin
Cotter
Pin
Valve
Body