DR Power Hydraulic 22-Ton - Manual (Page 3)

Contact us at www.DRpower.com 3
Specifications
MECHANICAL SPECIFICATIONS
Beam . . . . . . . . . . . . . . . . . . . . Heavy-duty 6 inch H-Beam
Wedge . . . . . . . . . . . . . . . . . . . 6 inch high-carbon steel (replaceable)
Force/Tonnage . . . . . . . . . . . . 22 ton
Cylinder Stroke . . . . . . . . . . . . 24 inches
Log Opening . . . . . . . . . . . . . . 25 inch maximum
Cycle Time . . . . . . . . . . . . . . . .12 seconds (approx.)
Operating Positions . . . . . . . . .Vertical/Horizontal
Wheels & Tires . . . . . . . . . . . . .High-Speed, 4.80 x 4.00 x 8"
Safety Chains . . . . . . . . . . . . . . Standard
Hitch Coupler . . . . . . . . . . . . . .2 inch locking ball (standard)
Engine . . . . . . . . . . . . . . . . . . . .Briggs and Stratton OHV horizontal shaft engine
HYDRAULIC SPECIFICATIONS
Cylinder Size . . . . . . . . . . . . . . . 4" x 24" clevis type cylinder, 1.75" rod
Hydraulic Tank . . . . . . . . . . . . . 7.5 gallon capacity
Hydraulic System . . . . . . . . . . . 9.5 gallon capacity (including tank, cylinder, hoses, filter)
Hydraulic Fluid Filter . . . . . . . . Spin-on type, 60 micron filter
Safety Release Control Valve . . Detent, auto return
Gear Pump . . . . . . . . . . . . . . . . 2-stage, 11 GPM
Control Valve . . . . . . . . . . . . . . .Auto Return
Hydraulic Fluid
Above 30° F . . . . . . . . . . . . . . . . Use AW-32, 10W (non foaming) or ATF Dextron III
Below 30° F . . . . . . . . . . . . . . . . Use only ATF Dextron III
SHIPPING SPACIFICATIONS
Shipping Weight . . . . . . . . . . . . 630 LBS