DR Power Hydraulic 22-Ton - Manual (Page 18)

18 DR ® 22-TON VERTICAL/HORIZONTAL WOOD SPLITTER
15. Install the control valve handle onto the valve link
(Figure 16) using a 1/4 x 3/4 inch long clevis pin
(install clevis pin from the top). Secure the clevis pin
with a cotter pin (bend the ends of the cotter pin to
make it secure).
16. Attach the control valve handle to the valve spool
(Figure 17) using a 1/4 x 1 inch long clevis pin (install
clevis pin from the top). Secure the clevis pin with a
cotter pin (bend the ends of the cotter pin to make it
secure). Attach the knob to the control valve handle,
if necessary.
17. Attach the high-pressure hose from the filter assembly
to the fitting on the side of the valve (Figure 18).
Securely tighten the hose fitting with a 10-inch
crescent wrench.
NOTE: The high-pressure hose is self-sealing and does not require
any type of sealing material.
Figure 18
Valve
Fitting
High
Pressure
Hose Fitting
From Filter
Assembly
Figure 17
Control
Valve
Handle
Clevis
Pin
Cotter
Pin
Valve
Spool
Knob
Figure 16
Control
Valve Handle
Clevis
Pin
Cotter
Pin