DR Power Hydraulic 22-Ton - Manual (Page 13)

Contact us at www.DRpower.com 13
Unpacking the Crate
1. Cut the metal banding and remove the protective
plastic covering, top, sides and ends, of the packing
crate (Figure 2). Do not remove the base unit or the
rail assembly from the bottom pallet at this time.
2. Locate and check the condition of the larger
components on the shipping pallet (Figure 3). If you
have any questions, call DR Power Equipment at 1
(800)
376-9637.
3. Cut the remaining banding straps, open the cardboard
box, and make sure all the smaller parts have been
shipped. The chart in the “Shipping List” section
provides a complete list of all the parts shipped with
your wood splitter. If you have any questions, call DR
Power Equipment at 1 (800)
376-9637.
NOTE: The contents of the cardboard box (Figure 4) contains
the tow hitch assembly, two safety chains and safety
link, two fenders, valve handle assembly, hydraulic
fluid filter, and rail rest assembly.
Also, included in the box is a plastic bag of miscellaneous
hardware and a plastic bag with the control valve
handle assembly.
Figure 3
Rail
Assembly
Base Unit
Banding
Straps
Cardboard
Box
Tongue and
Front Leg
Assembly
Figure 4
Fenders
Tow Hitch
Assembly
Safety
Chains
Control Valve
Handle Assembly
Hydraulic
Fluid Filter
Hardware
Rail Rest and
Locking Lever
Assembly
Figure 2
Packing
Crate
Metal Banding