DR Power 8 FPT - Manual (Page 9)

CONTACT US AT www.DRpower.com 9
Figure 2
12
11
6
7
8
5 10
9
Specifications
Unpacking the DR CHIPPER/SHREDDER
Tools and supplies needed:

Hammer or Pry Bar

Wire Cutters or Utility Knife
 Gloves & Safety Glasses

1/2" Socket or Wrench
1. Pry off the four (4) Bottom Boards of the Crate from the shipping pallet (Figure 3 on page 10).
2. Cut the Ties securing the Tow Beam and the Chipper/Shredder to the Crate and Shipping Pallet (Figure 3 on page 10).
Engine 8.00 FT-LBS Torque Briggs & Stratton
Please refer to the Engine Owner’s Manual for Engine-
specifications.
Tire Size 10 inch diameter
Clutch Centrifugal
Engagement speed 1,000 RPM (the Rotor will turn at idle)
Frame Welded 12 gauge steel construction
Belt V-Belt
Size 44 inches
Construction Wrapped for abrasion resistance
Machine Dimensions 56" L x 41" W x 44" H
Operating Weight 201 pounds
Shipping Weight 251 pounds
Shipping Dimensions 32" L x 34" W x 59" H
Parts supplied on shipping pallet ( Figure 2) w/machine
Item Description Qty
1 Tow Beam 1
Parts supplied in Shredder Hopper
2 Chipper Hopper 1
3 Hardware Plastic Bag 1
4 Safety Glasses 1
Parts supplied in Plastic Bag ( Figure 2)
5 5/16" - 18 x 3/4" Carriage Bolt 4
6 5/16" - 18 x 1" Bolt, HHCS 3
7 5/16" Flat Washer, USS 5
8 5/16" - 18 Nylon Lock Nut 7
9 1/4" - 20 Nylon Lock Nut 2
10 1/4" - 20 x 1-1/4" U-Bolt 1
11 Bent Hitch Plate 1
12 Knife Gauge 1
Engine Manual 1
Safety & Operating Instructions Manual 1
The Ties may be under tension. Wear Safety Glasses when cutting the Ties to protect your eyes.
2
4 3
1