ESI Waveterminal U2A - Manual (Page 7)

7
H A R D W A R E I N S T A L L A T I O N
Before you begin, make sure you have read your computer’s manual
on installing USB devices. Your computer’s manual should describe
the precautions you should take.
Shutting down computer wouldn’t need for installing an USB device to
the computer. However, we will take it from the start to make sure
you can follow every detail of installation.
1.
Find the USB port on your Mac. USB port is looked
like below.
USB port on computer
2.
Plug in appropriate plug of USB cable (called Series
A plug) to the USB port of computer. You will notice
that USB ports on computer and U2A are different.
Series A plug
3.
Connect the other end of the USB cable (Series B
plug) to the USB port of U2A.
Series B plug