ESI Waveterminal U2A - Manual (Page 9)

9
3. External Connections
U2A has many features that can enhance your audio production
environment. If you are serious enough to about your digital audio, you
may want to take time to read through this section carefully. While you
may not need all of these features, and simply opt to plug in the cables
to get started right away, you should at least be aware of U2A’s
capabilities – in case you need them later on.
B A S I C C O N N E C T I O N S
In a typical audio production studio or workstation, where you have
both digital and analog devices, this set up treats your MAC as a
stereo master recorder. In this case, monitoring of U2A will be similar
to “through-the-tape” monitoring, where you monitor your input and
output sources from the tape recorder’s point.
IN SEL
SESEL
L -Analog In -R L -Analog Out -R
From the stereo
output of an external
analog audio device To the monitor
system or stereo
input of mixer