ETA Gratus Maxipasta - Manual (Page 46)

I. SAFETY WARNING). Leave free space for due ventilation. Vents in the appliance
ensure air circulation during ventilation and they must not be covered or blocked in another
way. Also, the legs must not be removed. Make sure that the power cord is not damaged
and that it does not lead any sharp or hot surfaces. The electric socket must be easily
accessible so that the oven can be easily disconnected from power supply if danger
appears.
Food processor (A)
Assembly for operation (pic. 5)
Lift the multi-function head A7 up by pressing release lever A1. Attach the transparent
cover B2 on the underside of the head so that the fi lling opening points in front of the
head. Fill the stainless steel bowl B1 with food that is to be processed. Place the bowl on
the food processor base A, press on it and turn clockwise so that it locks in position on
the base. Select an appropriate attachment ( C1, C2 or C3) for your work, insert it into the
mount A3 in the head turn it to lock it into position. Tilt the multi-function head A7 down to
the work position by pressing lever A1 and pressing head A7 downwards until it locks in,
which is accompanied by an audible click. Place cover B3 on the cover fi lling opening B2.
Now the appliance is ready for operation.
Application
The food processor is used to prepare various types of cake mixes, biscuits, pastry
doughs, icings, fi llings, mashed potatoes, rising dough and so on. To prepare the
mentioned foods it uses beating or mixing whisks or a kneading hook.
Insert the power cord plug A11 into a power socket. Put the appliance into operation
by turning the speed dial A2 to one of the speed levels appropriate for processing your
mix (see table). It is possible to add to the mix during operation through the cover fi lling
opening B2. After fi nishing processing, turn off the appliance by turning the dial to
position 0. To manually control attachments C1 to C3 turn the dial to position P and hold
it in this position. The attachment will rotate while the dial is held. After releasing it the dial
automatically returns to position 0 and the rotation will stop. Turn the dial repeatedly until
you achieve the desired result. When disassembling or changing the attachment proceed
in the reverse sequence. Remove the stainless steel bowl B1 by turning it anticlockwise
so that the hooks in the food processor‘s base slide out of the grooves on the sides of the
bowl B1.
Attention
– The food processor is equipped with a safety switch, which in the case of the
multi-function head being A7 tilted out during the operation of the motor will turn the
motor off due to safety reasons. After tilting the head to the work position the motor will
not function. To turn it on, it is necessary to fi rst return the dial A2 to position 0 and
then again set the respective speed level.
– Possible short-time mild smoke when the appliance is operated for the first time is not
a defect and the appliance is not subject to a complaint for this reason.
– At intervals stop the machine and scrape the mixture off the dough hook.
– Different batches of flour vary considerably in the quantities of liquid required and the
stickiness of the dough can have a marked effect on the load imposed on the machine.
You are advised to keep the machine under observation whilst the dough is being
mixed.
!
46
GB
/ 90