Fenix Watts V27 - Manual (Page 28)

28
SMS = Zone status 7.3
To receive the information of a specific zone, send a SMS to your GSM module with the number of the de-
sired zone “Zxx”.
Nota:
It is impossible to configure a zone in vacation mode.
See chapter 7.4 to exit the vacation mode
Example1 : Z1 (On/Off Zone)
Then the module should answer you with a SMS like this:
Once this message received you will have the possibility to send back it with a different setting point
temperature by return the text of the SMS received and forward it with the only change, the value of the
setting point.
Example of modification
Z1= Living
Status = Ok
Mode = AUTO
Heating = 1
Status of the zone,
Ok => to say that the zone work properly.
Error => to say that the zone is faulty (thermostat batteries, receiver problem
…)
Name of the zone “Living”, the name displayed is the name chosen on your V24
Central unit. (The name will be always received in GB language)
Actual working mode. (Auto, ON, OFF, BOOSTER)
Heating indication. (1 = Heating demand / 0 = No heat demand)
Z1= Living
Status = Ok
Mode = AUTO
Heating = 1
Status of the zone,
Ok => to say that the zone work properly.
Error => to say that the zone is faulty (thermostat batteries, receiver problem
…)
Name of the zone “Living”, the name displayed is the name chosen on your V24
Central unit. (The name will be always received in GB language)
Heating indication (1 = Output ON / 0 = Output OFF)
New working Mode possible:
Text available V24 corresponding Symbol
AUTO
ON
OFF
BOOSTER 2H