Fire Magic 3052, 3053,3054,3055-S Flavor Grids - Manual

REV 3 - 1306271105 L-C2-011 1
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
INSTALLER: Leave these instructions with consumer.
CONSUMER: Retain for future reference.
Flavor Grids
Model #s: 3052-S, 3053-S, 3054-S, 3055-S
Fig. 1-1 Insert legs through grid
Fig. 1-2 Twist tabs with pliers
Fire Magic fl avor grids distribute heat evenly to the
cooking area while allowing quick and responsive
temperature control. You can conveniently add fl avor
enhancing wood, herbs, spices, or wood charcoal by
placing them on the fl avor grid.
INSTALLATION
1. With the tabs pointing upwards, slide the legs into
the fl avor grid slots as shown in Fig.1-1.
2. Using pliers, twist each side of the tabs clockwise
to lock the legs in place as shown in Fig. 1-2.
3. Place the fl avor grid legs directly on the burners
so that they rest centrally and evenly.
Note: Depending on your barbecue model, you may
be using two different sizes of fl avor grids. If
so, the smaller one sits on the center burners.
Important: When replacing your old fl avor grids,
discard the burner caps as these are
unnecessary when using the new
style fl avor grid.
Note: Place the fl avor grid assembly on the burners
before lighting the grill. (Refer to Installation
and Operating Instruction Manual.)
Barbecue
Model
3052-S
10"X13"
3053-S
10"X17"
3054-S
7"X13"
3055-S
7"X17"
Quantity of grids per unit
Deluxe 1
Custom I 2
Custom II 2
Regal I 2* 1
Regal II 2* 1
Monarch 3
Elite-50 4
* Indicates the grids used on the outer burners
Table 1-1 Required grid size