Flowserve BTV 2000 Lined Butterfly Valve User Manual
Page 5
SECTION V
A. VALVE ASSEMBLY –
1
/
2
” &
3
/
4
” G4, G4R
sECtiOn i
safety Precautions
To ensure that the valve is installed in a safe manner, please
adhere to the following precautions before removal or
disassembly of any valve.
1. There is a possibility of pressurized media build
up behind the valve liner. Wear suitable protective
equipment for the fluid involved when removing a
valve from the pipeline.
2. Depressurize and bleed the line on both sides of the
valve before removing the valve.
3. Check nameplate before installation to ensure that the
valve is not installed in systems where service conditions
exceed those for which the valve was designed.
4. Remove or install the valve with the disc in the closed
position.
5. Never attempt to adjust the disc in the seat while the
valve is pressurized.
taBLE OF COntEnts
Section Title Page
Foreword
3
I. Safety Precautions
5
II. Installation
6
III. Disassembly Procedure
7
IV. Parts List
7
V. Repair Kits
9
VI. Assembly Instructions
10
VII. Gear Operator Installation
17
VIII. Changing Gear Operator Quadrants
17
IX. Locking Lever Installation
18
X. Changing Locking Lever Quadrants
18
XI. Stud Bolts and Cap Screw Lengths – Wafer Style Body
19
XII. Cap Screw Lengths – Lug Style Body
19
Design Changes
In order to follow the Flowserve commitment to contin uous
improvement, we reserve the right to change product and
performance specifications without notice.
5
BTV/BUV 2000