Performance test for relays 1 and 4, Operation – Flowserve LRR1-40 TDS Control Unit User Manual
Page 26
Advertising
26
– co ntinu ed –
P erformance test for relays 1 and 4
Press button
briefly.
LED 1 and 4 are flashing rapidly.
LED 4 is illuminated during intermittent boiler
blowdown.
The test mode remains active for 10 seconds.
Press button
.
As long as the button is pressed down LED 1 is lit
and relay contact 1 opens (MAX limit).
Press button
. As long as the button is pressed
down LED 4 is lit and relay contact 4 opens (MIN
limit).
When automatic intermittent boiler blowdown is
active:
Press button
. As long as the button is pressed
down LED 4 is lit and relay contact 4 closes (intermittent blowdown valve opens).
Test
Test
Test
Advertising