Fluke Biomedical DPM4 - Manual (Page 17)

Parameter Tester
Controls and Connections
9
Table 1. Controls and Connections (cont.)
Number Name Description
G
Temp. 8-pin mini-DIN plug connector for the temperature cable. Use standard external
temperature probe type PT-100 or PT-1000 (DIN/IEC 751 Class A) for temperature
measurements in °C or °F.
H
RS-232 8-pin mini-DIN plug for connecting an RS-232 cable. Use this connection for uploading
new firmware, transferring measuring results, and calibration. You need a customized
cable to use this interface.
I
Battery Eliminator For use in operating the Tester from any standard electrical outlet. To ensure safe
operation, use only the Fluke Biomedical Battery Eliminator (PN 2647372).
WXWarning
Caution risk of electric shock. Use only the Battery Eliminator specified in
this manual or the protection provided may be impaired.
J
Pressure Pressure port connector.