Fluke Biomedical IDA-1S Getting Started User Manual

Page 4

Advertising
background image

Returns and Repairs

Return Procedure

All items being returned (including all warranty-claim shipments) must be sent freight-prepaid to our factory location. When you return an

instrument to Fluke Biomedical, we recommend using United Parcel Service, Federal Express, or Air Parcel Post. We also recommend that

you insure your shipment for its actual replacement cost. Fluke Biomedical will not be responsible for lost shipments or instruments that are

received in damaged condition due to improper packaging or handling.
Use the original carton and packaging material for shipment. If they are not available, we recommend the following guide for repackaging:

Use a double–walled carton of sufficient strength for the weight being shipped.

Use heavy paper or cardboard to protect all instrument surfaces. Use nonabrasive material around all projecting parts.

Use at least four inches of tightly packed, industry-approved, shock-absorbent material around the instrument.

Returns for partial refund/credit:
Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number, obtained from our Order

Entry Group at 1-440-498-2560.

Repair and calibration:

To find the nearest service center, go to

www.flukebiomedical.com/service

or

In the U.S.A.:

Cleveland Calibration Lab

Tel: 1-800-850-4608 x2564

Email:

[email protected]

In Europe, Middle East, and Africa:

Eindhoven Calibration Lab

Tel: +31-40-2675300

Email:

[email protected]

Everett Calibration Lab

Tel: 1-888-99 FLUKE (1-888-993-5853)

Email:

[email protected]

In Asia:

Everett Calibration Lab

Tel: +425-446-6945

Email:

[email protected]


To ensure the accuracy of the Product is maintained at a high level, Fluke Biomedical recommends the product be calibrated at least

once every 12 months. Calibration must be done by qualified personnel. Contact your local Fluke Biomedical representative for

calibration.

Advertising