Fluke Biomedical IDA-1S Getting Started - Manual (Page 9)

1
Introduction
The IDA-1S Infusion Device Analyzer (the Product) is a
portable, battery-operated instrument that verifies the
performance of medical infusion devices. The Product
measures the flow rate and volume delivered and the
pressure generated in occlusions or blockages of the fluid
line.
Intended Use
The Product is to be used by infusion device
manufacturers, hospital biomedical engineering
departments, and third-party service organizations. Use
the Product to verify accurate performance of infusion
devices through measurement of flow, volume, and
pressure. The performance of a wide range of infusion
devices can be analyzed including syringe, drop counting,
peristaltic, and volumetric types. Non-steady flow rate
pumps can also be analyzed. The Product uses distilled
or deionized water with an optional wetting agent only.
Unpack the Product
Carefully unpack all items from the box and check that
these items are included:
• The Product
• Battery charger / power supply
• Accessory Set:
o
plastic syringe (20 ml)
o 3-way Luer plastic stop-cock
o
extension tube, short (20 cm)
o drain tube (1 m)
o
Micro-90  (100 ml)
• CD (contains Users Manual and HydroGraph
Software)
• USB Cable