Fluke Biomedical 451EXL - Manual (Page 16)

Victoreen 451 EXL
Operators Manual
3-8
Configure Sound - Opens the sound control panel, which is used to configure Windows' sounds. To
change the alarm sound, select the “Inovision 451 Alarm” in the Sound Events list. The name box will
display the wave file currently used to generate the alarm sound. Change the sound by typing the
filename into the name box or select Browse to search for a wave file. Pressing the play button in the
sound control panel will play the sound in the name box.
Enable Acknowledge Alarm Functionality - A check in this box enables the alarm acknowledge button
during real time data logging.
Alarm State Colors - The 451 Assistant can be configured to use 2 or 4 alarm states. The four alarm
states are normal acknowledged, normal unacknowledged, alarm acknowledged and alarm
unacknowledged. If “Enable Acknowledge Alarm Functionality” is not checked, then only two alarm states
are allowed: alarm unacknowledged and normal acknowledged.
Alarm Definitions
Normal Acknowledged - The previous alarm has been acknowledged and the radiation rate is below the
alarm level.
Normal Unacknowledged - The previous alarm has NOT been acknowledged and the radiation rate is
below the alarm level.
Alarm Acknowledged – The alarm has been acknowledged and the radiation rate is above the alarm
level.
Alarm Unacknowledged – The alarm has NOT been acknowledged and the radiation rate is above the
alarm level.
Options (451 Settings)
The 451 Settings menu contains information about the 451 currently connected to the PC. These setting
pertain to the 451 only and have no impact on the operation of the 451 Assistant. These settings allow
the user to change the configuration of the
451.