Formax FD 4040 - Manual (Page 8)

5. Mount the side rails to either side of the conveyor with 6 each white Phillips head machine screws provided in
accessory bag. The taller side goes on the out-feed end (Fig 9 items A & B). Note: If the optional D1000 1K dryer
is going to be attached leave the side rail screws loose for mounting the dryer.
6
C
B
A
6. Install threaded end of envelope knock down
rod (Fig 10 item B) into hole of envelope knock
down post (Fig 10 item C). Install 1 white Phillips
head screw through post and into threaded
rod. Install envelope knock down guide (Fig 10
item A) onto rod, as shown (Fig 10), and secure
using thumb screw.
Warning! Be sure the bottom of the envelope
knock down guide does not rub against the belt
or damage to the belt may result.
7. Install exit wheel assembly (Fig 11 item A)
between rails of conveyor; align with mounting
holes and secure in place with 2 black
thumbscrews provided. The wheels can be
repositioned anywhere along the rod to meet
your specific needs.
Fig 10
A
Fig 11
B
Fig 9
A
screw