Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 10)

RAID User’s Guide
8
C. Setting RAID 0+1
a. To utilize RAID 0+1 function, four SATA hard disks should be installed.
b. Choose Create RAID Volume and press <Enter> to enter. Press <Tab> to
switch to RAID Level item, and then use Up and Down arrow keys to select RAID0
(Stripe), pressing <Enter> confirms.
c. Using up and down arrow keys to select two hard disks for RAID 0, <Space>
key to confirm and <Enter> key to finish the selection in the Disks item.
d. The following steps is the same as Setting RAID 0.
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 8