Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 8)

RAID User’s Guide
6
B. Setting RAID1
a. Select RAID1 (Mirror) by using Up and Down arrow keys in RAID Level item.
Press the <Enter> key to make selecting.
c. Choose which two hard disks you want to set RAID 1 from Disks item, if you
install three or more SATA hard disks. Otherwise continue with the next step.
Using up or down arrow key to select the hard disk, <Space> key to confirm and
<Enter> key to finish the selection.
b. The following information will appear on screen:
Press “Enter” to create the specified volume.
Press the <Enter> key again to confirm.
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 6