Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 15)

RAID User’s Guide
13
E. Reset RAID
1. Select Reset Disk to Non-RAID in main menu and press <Enter> key to delete
the RAID setting and remove all RAID structures from the drives. Then you will
see:
2. Press <Y> key to confirm the volume deletion, press <N> to cancel the operation.
5. Installing Windows 2000/XP with RAID
1. Setup the desired RAID mode in BIOS setup follow the above steps.
2. Insert Operation System installation disk into CD-ROM and start up the
setup program.
3. Press <F6> when the following picture appears on screen:
4. Press <S> key to specify additional equipment when below picture appears.
Are you sure you want to reset RAID data on selected? (Y/N):
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 13