Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 7)

RAID User’s Guide
5
d. Use Up and Down arrow keys to select desired strip size when enter Strip Size
menu. The available values range from 4KB to 128KB. The strip value should be
based on the planned drive usage. Some suggested selections are listed below.
The default selection is 128KB.
16K_Best for sequential transfer
64K_Good general purpose strip size
128K_Best performance for most desktops and workstations
e. Press the <Enter> key after the Create Volume prompt appears to create the
array. Press the <Y> key after the prompt to confirm this selection.
f. Select option 4. Exit in main menu and press the <Enter> key to exit the RAID
configuration utility. Press <Y> key to confirm the exit.
WARNING: ALL DATA ON SELECTED DISK WILL BE LOST.
Are you sure you want to creat this volume? (Y/N)
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 5