Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 6)

RAID User’s Guide
4
b. Choose Create RAID Volume and press <Enter> to enter. Press <Tab> to
switch to RAID Level item, and then use Up and Down arrow keys to select RAID0
(Stripe), pressing <Enter> confirms.
c. Choose which two hard disks you want to set RAID 0 from Disks item, if you
install three or more SATA hard disks. Otherwise continue with the next step.
Using up or down arrow key to select the hard disk, <Space> key to confirm and
<Enter> key to finish the selection.
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 4