Foxconn 925XE7AA-8EKRS2-RAID - Manual (Page 18)

RAID User’s Guide
16
SiIicon 3114 SATA RAID (optional)
1. Introduction
Silicon Image’s SATARAID5 TM software provides Serial ATA RAID 0 (Striping), RAID
1 (Mirroring), RAID 5 (Parity RAID), RAID 10 (Striping and Mirroring), and JBOD
(just a bunch of disks) functionality to enhance the industry’s leading PCI-to-SATA
host controller products. Two major challenges facing the storage industry today
are keeping pace with the increasing performance demands of computer sys-
tems by improving disk I/O throughput and providing data accessibility in the face
of hard disk failures while utilizing full disk capacity. With SiIicon Image Serial ATA
host controller and SATARAID5, both of these problems are solved.
SATARAID5 software provides a Graphical User Interface (GUI) for easy-to-use
configurations of the RAID Groups.
2. SATARAID5 Features
• RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
• Hot Spare and On-line Rebuilding
• System GUI Monitoring Utility:
- Displays/Logs/Alerts Users to Vital RAID Set Information
- Manages RAID Group Functions (configures, rebuilds, etc.)
• Supports the ability to partition and map a segment of disk to a virtual LUN or
disk
• HDDs Function Normally When Not in RAID Sets
• Adjustable Stripe Size for RAID 0, RAID 5, and RAID 10
• Automatically Selects Highest Available Transfer Speed for All SATA Devices
• Supports:
- Data transfer rate up to 150MB/Sec (SiI3114, SiI3124-1), and 300MB/Sec
(SiI3124-2)
- Up to 4 SATA devices connected to a single controller.
- ACPI, SATA 1.0 (SiI3114, Sii3124-1), and SATA 2.0 (SiI3124-2)
ＲＡＩＤ Ｍａｎｕａｌ．ｐ６５ 2005-1-21, 10:29 16