Foxconn P35AP-S - Manual (Page 61)

Chapter 5 Directions for Bundled Software
55
3.3 Configure - Advance
This page helps you to flash BIOS, Boot Block and clear CMOS .
3.2 Configure - System
In this page, you can set the backup BIOS location and change different skin of
the utility.
we recommend that you keep the default setting unchanged to
avoid damagement.
Attention
Click here
Set the location of
download files or
auto backup BIOS
Determine if the FOX liveUpdate can
auto run when the system starts up
Select different skin
of the software
Apply the changes
Reset to default value
Click here
Select which BIOS ROM
to flash(Only available to
MotherBoard with backup
BIOS ROM )
Apply the changes Reset to default value
Select to flash Boot Block
Select to clear CMOS
PDF 文件使用 "pdfFactory" 试用版本创建 ÿ ÿ www.fineprint.com.cn