Fronius Agilo 360.0-3 TL - Manual (Page 61)

59
EN
The Setup menu
Initial setting After completing comissioning the inverter is pre-configured depending on the country set-
up.
The SETUP menu item allows the initial settings of the inverter to be changed easily to
bring it in line, as closely as possible, with the preferences and requirements of the user.
Navigating in the
setup menu Accessing the setup menu
Scrolling between the entries
Exiting an entry
If no key is pressed for 2 minutes,
-
the inverter switches from wherever it is on the menu level back to the 'NOW' menu
item (exception: 'Standby' setup menu entry)
- the display backlighting goes out
- the amount of energy currently being fed in is displayed
'SETUP' menu level selected
In the menu level, use the 'Left' or
'Right' keys to select the 'SETUP'
menu item
Press the 'Enter' key
'Standby' entry
The first entry under the setup menu is
displayed:
'Standby'
Example: 'Contrast' entry
Use the 'Up' and 'Down' keys to move
between the available entries
To exit a menu entry, press the 'Back'
key
The menu level appears
1
2
3
5