Fronius Acctiva Easy - Manual (Page 25)

23
EN
Operation
Introduction Thank you for the trust you have placed in our company and congratulations on buying this
high-quality Fronius product. These instructions will help you familiarise yourself with the
product. Reading the instructions carefully will enable you to learn about the many different
features it has to offer. This will allow you to make full use of its advantages.
Please also note the safety rules to ensure greater safety when using the product. Careful
handling of the product will repay you with years of safe and reliable operation. These are
essential prerequisites for excellent results.
Controls and con-
nections
Setting the selec-
tor switch If your charger is equipped with a selector switch, it will be able to perform a number of
different functions (see rating plate).
All device types can be used to charge lead acid batteries with a liquid (lead, Ca, Ca silver)
or fixed (AGM, MF, sealant) electrolyte.
WARNING! An incorrectly set selector switch can lead to severe product damage
and poor results. Set selector switch according to the type of battery used and/or
battery voltage.
Hinged mains plug (0° , 45° , 90°)
LCD
Selector switch (depending on charger
type)
Socket for charger lead
Acctiva Easy 6/12
Battery voltage setting:
Setting A: 12 volts
Setting B: 6 volts
Acctiva Easy 12/24, Selectiva 1002/2003
Battery voltage setting:
Setting A: 24 volts
Setting B: 12 volts
00000000000000 4,010,XXX,XXX
00007432420000
ACCTIVA EASY 6/12
230V / 50-60Hz 24W 6/12V = 3 / 2Aarith Out:
Art. Nr.:
In: Chr. Nr.:
A B
6V 12V
Always stop charging before you disconnect the charging cable!
Toujours arrêter la charge avant de débrancher le câble de charge!
IP
30
00000000000000 4,010,XXX,XXX
00007432420000
ACCTIVA EASY 12/24
230V / 50-60Hz 43W 12/24V = 3/1,8Aarith Out:
Art. Nr.:
In: Chr. Nr.:
A B
12V 24V
Always stop charging before you disconnect the charging cable!
Toujours arrêter la charge avant de débrancher le câble de charge!
IP
30