Fronius Acctiva Twin 15A - Manual (Page 47)

45
EN
(3) Start/Stop button
For interrupting and restarting charging
For manual selection of charging voltage 12 V / 24 V
For accessing the Setup menu and selecting the synergic line type. For more infor-
mation on this, see the "Setup menu" section.
If FireCAN is being used:
Initiate the setting of the FireCAN node address. For more information on this, see
the "Setup menu" section.
Resetting the service code for the "Defective fuse" function. For more information
on this, see the "Charging the battery" section.
(4) Error indicator
(5) Ready indicator
Charging voltage 12 V
(6) Ready indicator
Charging voltage 24 V
Plugging in op-
tions
Connections
No. Function
(1) Connection P1 - charging cable socket
Battery 1 connection
also for temperature-controlled charging option
NOTE! Danger of damage to charger and accessories. Only plug in options and
system add-ons when the mains plug is unplugged and the charging cables are
disconnected from the battery.
(1) (2) (3) (4)
(6) (5)
(7) (8) (9)