Fusion MS-AV700i - Manual (Page 18)

17
Tuning Method Applies to… When tuning with this method…
Manual All bands • Press the Forward or Backward key to step through
the range of frequencies or channels one at a time.
• Press and hold down the key for rapid scanning of
frequencies or channels.
Manual SiriusXM • Press the Forward or Backward key to step through
all channels one at a time.
Category SiriusXM • Press the Play / Pause, Forward or Backward key to
step through the channels in the selected category.
• Only available when a category is selected in
the Category menu item. For further details see
“Category” on page 47.
Auto AM/FM • Press the Forward or Backward key to start
searching for available stations.
• Press the Play / Pause, Forward or Backward key to
stop the search.
Scan VHF • Scans through preset channels, pausing on a
channel while it is transmitting.
• Only available if there are two or more presets
saved.
• If there is any background noise, the scan will stop.
For further details see “Minimizing background
noise” on page 18.
• Press the Play / Pause, Forward or Backward key to
turn scan mode off. For further details see “Turning
scan mode on” on page 19.
NOTE: The Scan function is activated from the settings
menu, see ‘Setting up VHF’
Preset All bands • Press the Forward or Backward key to step through
available presets.
• Only available if there are two or more presets
saved.
• To tune to a specific preset:
a. Press the Menu key, and then press the
Encoder to select Presets.
b. Turn the Encoder to highlight the required
preset.
c. Press the Encoder to tune to the highlighted
preset.
For further details, see “Adding and Removing Presets”
on page 18.