Fusion MS-AV700i - Manual (Page 20)

19
Before you can use your media device as an input source you must first
connect the device to the FUSION stereo as described in the
installation section.
To listen to audio from your iPod, MTP device, Bluetooth device or USB
FLASH drive:
ANDROID (MTP) SUPPORT: MTP is a standard developed for connecting media (music) devices over
USB. It has been adopted on a number of platforms including Android. FUSION currently supports a
range of smartphones utilising MTP.
Refer to www.fusionelectronics.com for the latest list of support devices.
PLAYING MUSIC CONTENT
MS-IP700i
iPod
• Press the iPod key. The iPod input source screen is
displayed. The most recently selected track starts
playing at the current play point.
• To appear on the iPod source screen the iPod
may be inserted either into the internal dock or
an external UNI-Dock or connected to the external
USB connector.
MS-AV700i,
MS-IP700i
Auxiliary
• Press the Auxiliary key. Keep pressing the key until
the iPod (MS-AV700i only), USB, Bluetooth or MTP
source screen is displayed.
4. Press any key to exit
Turning scan mode on
Scan mode allows the 700 Series to scan through preset VHF channels,
looking for active channels.
Note: If the Squelch level is adjusted so that you can hear a constant hissing sound, the
unit will not scan correctly. To correct this, see “Minimizing background noise”, above.
To turn scan mode on:
1.
Press the Menu key.
2. Turn the Encoder to highlight the Scan menu item.
3. Press the Encoder to select the checkbox ( ). Scan mode is turned on and the
menu exits automatically.
Note: Pressing the Play / Pause, Forward or Rewind key turns scan mode off.