Fusion MS-AV700i - Manual (Page 53)

52
Tel mute
Use this option to control which action is taken when the 700 Series is
connected to a cellphone hands-free kit.
To change the Tel mute setting:
1.
Press the Menu key.
2. Turn and then press the Encoder to select Settings > Tel mute.
3. Turn the Encoder to select the required option:
• Mute. Mutes the audio output from the 700 Series when a call is
received on your cellphone.
• Aux. Allows the received call to be broadcast through the Auxilary input
on the 700 Series.
Note: This feature may not operate all available hands-free kits. Hands free
kit must be connected to the TELMUTE input and
AUX input.
4. Press the Rotary Encoder to save the setting and exit.
5. Press any key to exit
Tuner region
Use this option to select the correct region .
To change the tuner region setting:
1.
Press the Menu key.
2. Turn and then press the Rotary Encoder to select Settings > Tuner region.
3. Turn the Rotary Encoder to select the required region.
4. Press the Rotary Encoder to save the setting and exit.
5. Press any key to exit
VHF region
Use this option to select the correct VHF tuning region. Please refer to the
specifications section for additional channel information.
To change the VHF region setting:
1.
Press the Menu key.
2. Turn and then press the Rotary Encoder to select the Settings > VHF region.
3. Turn the Rotary Encoder to select the required region.
4. Press the Rotary Encoder to save the setting and exit.
5. Press any key to exit
Sources
Use this option to turn the AM or VHF tuner source on or off, if required. This
is useful if you only listen to FM and do not wish to step through AM and VHF
when selecting a tuner source.
The Sources option also enables you to select a name for AUX input and
configure the shared SiriusXM/Bluetooth input source.