GAI-Tronics 7325-106 Multi-Party Amplifier Enclosure ((ATEX Zone 2/CE Mark) User Manual

Confidentiality notice, General information, Installation

Advertising
background image

Pub. 42004-370E

GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA

610-777-1374

 800-492-1212  Fax: 610-796-5954

V

ISIT WWW

.

GAI

-

TRONICS

.

COM FOR PRODUCT LITERATURE AND MANUALS

G A I - T R O N I C S ® C O R P O R A T I O N

A H U B B E L L C O M P A N Y

Model 7325-106

Multi-Party Amplifier Enclosure

Confidentiality Notice

This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may
not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.

General Information

The Model 7325-106 Multi-Party Amplifier Enclosure is a component of the 700 Series Page/Party
system. This enclosure is configured for multi-party systems and can accommodate conversations on up
to five party lines simultaneously.

The Model 7325-106 is constructed of cast aluminum and is extremely weatherproof and corrosion-
resistant. It is equipped with terminal strips for connecting system cable. The Page/Party

®

Series

amplifiers mate directly with this enclosure.

Installation

CAUTION

Do not install this equipment in hazardous areas other than those indicated

on the approval listing in the “Specifications” section of this manual. Such installation may cause a
safety hazard and consequent injury or property damage.

WARNING

Do not disconnect equipment while energized.

Insure proper grounding to protective earthing.

When installing an add-on station, consult the appropriate system layout diagrams. These figures, when
used in conjunction with the station installation information and cable layout guide, should provide all the
information necessary to install additional Page/Party stations.

Enclosure Placement

All GAI-Tronics Page/Party

®

units are wired in parallel. Good system layout design minimizes the cable

required for each installation. GAI-Tronics multi-conductor cable, designed especially for this
application, is recommended. The number, size, and color-coding of conductors are listed in the system
connection diagrams.

Advertising