Specifications – GAI-Tronics 297-103RT4 Retrofit S.M.A.R.T. Externally Powered Emergency Phones User Manual

Page 16

Advertising
background image

P

AGE

15 of 17

R

ETROFIT

E

XTERNALLY

P

OWERED

S.M.A.R.T.

E

MERGENCY

P

HONES

Pub. 42004-379A

\\s_eng\gtcproddocs\standard ioms - current release\42004 instr. manuals\42004-379a.doc
08/06

Specifications

TMA Compatibility profile type ................................................................... GTC S.M.A.R.T. Hands-free

Auto-dial digit limit ..................................................................................................................... 24 digits

Electrical

Audio output ................................................... Voice - 90 dB SPL @ 1 meter independent of loop current

1 kHz tone - 90 dB SPL @ 1 meter independent of loop current

Input ................................................................................................................................... 24 or 48 V dc

Phone line requirements ....................................................................... Loop start, central office (CO), or

Analog station port (PBX, PABX, or KSU)

Minimum loop start ...................................................................................... 24 mA (with external power)

40 mA (without external power)

Auxiliary output (isolated solid state switch)............................................................... 48 V dc @ 125 mA

28 V

RMS

@ 80 mA

RMS

Power supply (included) ..................................................................................................12 V dc, 200 mA

Signaling.................................................................................................................... DTMF 100 ms tone

Memory ............................................................................................................... Non-volatile EEPROM

Mechanical

Operating temperature range............................................................................................ -20º C to +60º C
Relative humidity ......................................................................................... . Up to 95%, no condensation

Panel construction .................................................................................. 14-gauge, brushed stainless steel

Panel dimensions – overall RT models ...... 11.88 H

× 8.25 W × 2.80 D inches (301.6 × 209.6 × 71.1 mm)

Panel dimensions – overall CB models ...... 11.75 H

× 8.50 W × 2.80 D inches (298.4 × 215.9 × 71.1 mm)

Hole pattern for RT 4-screw models ................................... 6.00 W

× 11.63 H inches (154.4 × 295.4 mm)

Hole pattern for RT 6-screw models ..............7.31 W

× 9.96 H (w/ center screw) inches (185.7 × 253 mm)

Hole pattern for CB 6-screw models ......... 7.75 W

× 10.26 H (w/ center screw) inches (196.8 × 260.4 mm)

Back box ........................................................... 16-gauge cold-rolled steel with black polyurethane finish

Weight ...................................................................................................................Approximately 6.5 lbs.

Approvals

Safety of Information Technology Equipment.................................................................... UL/CSA 60950

Enclosures for Electrical Equipment ................................................................................. UL 50, Type 3R

47 CFR Part 68

Certification Number....................................................................................... US: ADGTE04B0414HAC

Ringer Equivalence Number ............................................................................................................... .4B

Network connection (USOC)............................................................................................................. RJ11

IC Information (Canada)

IC Certification Number ........................................................................................ 882B-GTC S.M.A.R.T.

Ringer Equivalence Number ............................................................................................................... .4B

Connection Method ....................................................................................................................... CA11A

Advertising