GAI-Tronics 10959-201 and 10959-203 Wall-mount Audio Messenger Interface - Manual (Page 19)

Pub. 42004-403F
M ODEL 10959-201 AND -203 W ALL -M OUNT A UDIO M ESSENGER I NTERFACES P AGE 17 of 20
f:\standard ioms - current release\42004 instr. manuals\42004-403f.doc
11/13
AMI Configuration Tool (ACT)
Overview
The Audio Messenger Interface Configuration Tool (ACT) software is used to define and change
configurations for the Audio Messenger Interface (AMI), and is included with all models of AMI. To
retrieve configurations and play audio messages, the AMI accesses a CompactFlash
® card. Each AMI is
shipped with a CompactFlash ® card pre-programmed with the AMI Factory Default configuration.
Please refer to the online help for specific instructions.
System Requirements
The ACT software must be installed on a Windows PC (Windows 98 SE/XP/2000) equipped with a USB
port. A reader/writer capable of programming CompactFlash
® memory cards must be connected to the
USB port. The CompactFlash ® reader/writer is not included with the AMI.
Configurable Parameters
Fragments
All tones and voice messages are digitally recorded and stored on the CompactFlash ® card as MP3 files.
Messages
Each message is a collection of fragments. The content of each message must be defined by selecting the
fragment(s) to be incorporated into the message. Other message parameters include:
 Message title
 Priority
 Volume
 Play mode and repeat interval
Inputs
Each input circuit must be enabled or disabled. If enabled, it must be programmed with several
parameters such as:
 Title containing a brief text description of the input and its use
 The type of switch contact being used to activate the input (normally open, closed)
 The action of the switch (maintained, momentary, toggle on/off)
 Function of the input (activate a message, reboot, mute, etc.)