GAI-Tronics 12599-002 Hot Standby Amplifier Module - Manual

Pub. 42004-412A
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 12599-002
Hot Standby Amplifier Module
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 12599-002 Hot Standby Amplifier Module is designed for use in system cabinets equipped
with central power amplifiers requiring hot (automatic) switching of a standby (backup) amplifier when
any one of the primary power amplifiers fail.
This module provides prioritized switching for either six single-channel power amplifiers, or three dual-
channel amplifiers with up to 700 watts of output power per channel. Also, multiple modules can be
cascaded using an “in/out” board control feature.
Figure 1. Model 12599-002 Hot Standby Amplifier Module
(Switches shown in factory default position)