Installing the antenna – GAI-Tronics 370-400 UHF and VHF Page/Party Radio Couplers User Manual
Page 5
Advertising
Pub. 42004-432D
Model 370-400 UHF and 370-420 VHF Page/Party
®
Radio Couplers
Page:
5 of 13
f:\standard ioms - current release\42004 instr. manuals\42004-432d.doc
11/11
Installing the Antenna
1. Select an appropriate antenna based upon the frequency of the radio and connect it to the BNC
connector on the top of the enclosure. Refer to Figure 3.
2. The antenna should be remotely mounted in a location that provides line-of-sight communication to
the surrounding area. Refer to the “Specifications” section for specific RF module frequency
information.
Figure 3. Antenna Connection
Advertising
This manual is related to the following products: