GAI-Tronics 352-701 UL Class 1 Division 1 VoIP Telephones - Manual (Page 20)

Pub. 42004-456C
Model 352-701 and 352-703 Division 1 VoIP Telephones Page 20 of 20
f:\standard ioms - current release\42004 instr. manuals\42004-456c.doc
02/15
Environmental
Operating temperature .......................................................................... −4º F to +131º F (−20º C to +55º C)
Humidity ...................................................................................................................... 95% non-condensing
Mechanical
Enclosure .............................................................................. Cast aluminum with aluminized lacquer paint
Handset Cord ....................................................... “G” style handset/PVC 6-foot extended length (standard)
Connection ............................................................................................................................ RJ45 receptacle
Dimensions, outside ................................ 10.25 W
 12.25 H  9.50 D inches (260.3  311.1  241.3 mm)
Mounting .................................................. Wall or column, four 3/8-inch (10 mm) mounting feet with slots
Shipping weight ................................................................................................................ 30.0 lbs. (13.6 kg)
Net weight ......................................................................................................................... 28.0 lbs. (12.7 kg)
Approvals
NRTL listed ...................................................... Hazardous locations Class I, Division 1, Groups B, C, & D
(USA and Canada) Class II, Division 1, Groups F & G
Class III, Division 1
Type 4X
T6 – Gas
T4A – Dust
User Instructions (USA)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.