GAI-Tronics 295-702F, 295-702W VoIP Clean Telephones - Manual (Page 5)

P UB . 42004-470E
V O IP C LEAN P HONE
®
T ELEPHONES P AGE 5 of 22
e:\standard ioms - current release\42004 instr. manuals\42004-470e.doc
02/15
Features and Functions
The Clean Phone ® Telephone’s voice-over-internet protocol (VoIP) include the following features:
 SIP compatible (RFC3261)
 Automatic call divert (memory list)
 Real-time alarm reporting via email, syslog, or TMA software
 Configurable via web page, serial link or download
 Four auxiliary inputs; two volt-free contact outputs
 Multicast capability, up to eight addresses
Operation
Placing an Autodial Call from a VoIP Clean Phone ®
To place an autodial call:
1. Press the desired autodial push button to place an immediate call to a preprogrammed number.
2. When the call is connected, the hookswitch indicator will light.
3. The call is terminated by the following: pressing the ON/OFF push button, or the receiving caller
hanging up, or the defined timeout of the call duration, or via the SIP Server.
Placing a General Telephone Call
To place a general telephone call:
1. Press the ON/OFF push button.
2. Wait for the dial tone.
3. Use the keypad to dial the desired number.
4. When the call is connected, the “off-hook” indicator will light.
5. The call is terminated by one of the following methods: pressing the ON/OFF push button, the
receiving caller hanging up, call duration timeout, or via the SIP Server.
Receiving a Call
When a VoIP Clean Phone ® is called, the unit automatically goes off-hook (auto-answer) and a
conversation can take place.