GAI-Tronics 703-005 Indoor RTU Enclosure - Manual

Pub. 42004-617L2D
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-775-6540
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 703-005 SmartSeries ®
Indoor RTU Enclosure
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics
retains all intellectual property and other rights in or to the information contained herein, and such
information may only be used in connection with the operation of your GAI-Tronics product or system.
This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
The Model 703-005 RTU (Remote Terminal Unit) Indoor Enclosure is designed to be a component in
GAI-Tronics SmartSeries
®
system. It mates with a SmartSeries
®
handset or speaker amplifier to form a
SmartSeries ® station.
When connected to a SmartSeries ® system, the station operates as a standard multi-party Page/Party ®
device. In addition, it supports supervised input circuits and a relay output (supervision optional). The
following configurations are possible:
• 1 supervised input circuit and 1 supervised relay output (factory setting)
• 2 supervised input circuits and no relay output
• 2 supervised input circuits and 1 non-supervised relay output
Note: The relay output circuit is intended to be used with GAI-Tronics-approved equipment. The circuit
may not support supervision of equipment that is not approved by GAI-Tronics.
How to Use the Assembly/Model
This section describes applications for the Model 703-005 SmartSeries
®
RTU Enclosure, its hardware,
software configuration, interfaces and operation.