GAI-Tronics XAAB002A Audio Accessory Box - Manual (Page 9)

5 11/06
Description
Physical Description
The GAI-Tronics Model XAAB002A Audio Accessory Box measures 1.55 H
× 6.40 W × 4.25 D inches.
It contains five connectors and an optional mute radio push button on the front panel, and the rear panel
contains six connectors. A seventh connector, J10, is an available option. It is shipped with a 9-volt dc
wall plug-in power supply, a 7-foot RJ45 male-male 8-pin modular cable (mirror-connected), a 6-foot 4-pin
retractile cord, and a dc power connector.
The XAAB002A also includes a cover that can be used as a bracket in specific mounting arrangements
described in the Installation section. Optional accessories, such as microphones, headsets, footswitches,
etc. must be ordered separately.
Front Panel
Refer to the figure below for the locations of the connectors and optional mute push button on the front
panel of the accessory box.
Rear Panel
The rear panel of the accessory box is shown below. Note that connector J10 is optional.
Model XAAB002A Audio Accessory Box - Rear Panel
Model XAAB002A Audio Accessory Box - Front Panel