GAI-Tronics 12514-007, 12514-008, 12514-009 6', 15', 25' Coil Cord, 6C and Bushing Kit - Manual

Pub. 42003-035B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
PVC Coil Cord Replacement Kit
Models 12514-007, 12514-008, and 12514-009
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
These kits are for use on the following models:
• 240 • 250 • 611 • 701-201 • 701-205 • 7165-002
• 246 • 256 • 6115 • 701-202 • 711-002 • 726-101
• 247 • 257 • 616 • 701-203 • 7115-002 • 7265-101
• 248 • 258 • 6165 • 701-204 • 716-002
This kit includes the following components:
Qty Description
1 Strain-relief Bushing
1 6-foot PVC cord (Kit 12514-007 only)
1 15-foot PVC cord (Kit 12514-008 only)
1 25-foot PVC cord (Kit 12514-009 only)
Installation
Models 240, 246, 247, 248, 250, 256, 257, 258
Removal of old cord
1. Loosen and remove the screws securing the front panel. Pull the front panel assembly away from the
back enclosure.
2. Disconnect the modular telephone line from the PC board. Disconnect the four handset wires from
the PC board.
3. When replacing a PVC cord, use a Heyco® bushing tool, or a set of needlenose pliers, to squeeze the
notch on the front panel side of the strain relief bushing and pull out the bushing.