GAI-Tronics 12522-003 Speaker Assembly Replacement Kit - Manual

Pub. 42003-199B
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374 „ 800-492-1212 „ Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Speaker Assembly Replacement Kit
M
ODEL
12522-003
Confidentiality Notice
This manual is provided solely as an operation, installation, and maintenance guide and contains sensitive
business and technical information that is confidential and proprietary to GAI-Tronics. GAI-Tronics retains
all intellectual property and other rights in or to the information contained herein, and such information may
only be used in connection with the operation of your GAI-Tronics product or system. This manual may not
be disclosed in any form, in whole or in part, directly or indirectly, to any third party.
General Information
This kit is to be used in the following GAI-Tronics Emergency phones:
• 293-003 • 294AL-003 • 298-003 • 293AL-001 • 297-001
• 293AL-003 • 297-003 • 293-001 • 294AL-001 • 298-001
This kit contains the following:
Qty Description
1 Weatherproof speaker, 3.5-inch, 45-ohm, with connector
1 Tie wrap
The following tools are required:
• ¼-inch hex nut driver or socket wrench
• Model 233 Tamper-Resistant Screwdriver
• #2 Phillips screwdriver
Installation
(Models 297-00x and 298-00x)
Removing the Old Speaker Assembly
CAUTION
Disconnect the phone line.
1. Use a Model 233 Tamper-resistant Screwdriver to remove the screws securing the front panel assembly
to the back box. Save these screws for re-assembly.