Geist Upgradeable PDU - Manual (Page 21)

Interchangeable Monitoring Device 21
© 2015 Geist GM1157 - GU PDU Instruction Manual
3.4.2 Mac
Click the System Preferences icon on the Dock, and choose Network.
Be sure Ethernet is highlighted on the left side of the NIC window. (In most cases,
there will only be one Ethernet entry on a Mac.)
Select Manually from the Configure IPv4 drop-down list, then set IP Address to
192.168.123.1 and Subnet Mask to 255.255.255.0. (The Router and DNS Server
settings can be left blank for this initial setup.) Click Apply when finished.
Once the NIC settings are configured properly, you should be able to access the unit
by typing http://192.168.123.123 into the address bar of your web browser. If
you are setting up the unit for the first time, or if the unit has been reset back to
factory defaults via the network-reset button, the unit will require you to create an
Admin account and password before you can proceed.