Geist RAC - Manual (Page 27)

27 Revision Date: 09/03/2014
Camera Configuration
Enter the domain names/IP addresses and models of up to four IP-addressable network
cameras in the “Cameras” section of the Monitoring tab on the Configuration page. The unit
will present a linked snapshot from each camera on the Sensors page.
Figure 22: Configuration and Supported Models
Note: Each camera must be set to allow anonymous access to enable this feature.
Admin Information
Information entered in the “Admin Info” section of the Admin tab of the Configuration page will
show up at the bottom of the unit’s web interface.
Figure 23: Admin Information Fields
Figure 24: Admin Information Display