How do i change the handset ids, How do i reset the handsets – Genee World Genee Pad User Manual

Page 17

Advertising
background image

1

How do I change the Handset IDs?

To change the handset id, use the following steps in sequence:

Keep the ‘/’ key pressed for a few seconds until a ‘?’ appears on the display screen.

If the ‘/’ also appears on the display screen, then erase it using the ‘del’ key.

Type 1234 on the keypad and press the “Delta” or “Chart” key if using the Teacher handset.

‘ID=’ will be displayed on the screen.

Enter the handset id you want to be allocated to the handset in three digit format. For example,

to set the handset id to 1, enter 001 on the keypad.

Note: Handset id must be between “000” and “255” excluding “126” and “206”.

Press the “Delta” key again. Handset id will be set to the number entered. This can be confirmed

by checking the number being displayed in the upper-right corner of the handset screen.

2

How do I reset the handsets?

Use a sharp, pointed object to press the small button located on the back of the handset. Use

this when handset will not map correctly, freezes or with charging problems.

3

What is “Mapping” handsets? When do I need to do this?

Each receiver has a unique ID as shown on the receiver ID label. All handsets are locked into

communicating with a receiver. If you want to lock a handset to work with a different/new

receiver you must press and hold down the “?” key until the handset has mapped. This can take

several seconds. When you see the up/down arrows flashing on the handset LCD, the handset

is locked to the new receiver. Please note that when locking handsets the distance between

handset and receiver should be a approx 50-75mm.

4

How long do I have to re-charge the Genee Pad handsets

for?

7 to 10 hours charge is normally needed to fully charge a totally flat handset. If a handset has a

small amount charge a 2 hour booster charge is needed. The length of time between charging

will depend upon the usage.

5

What technology does the response system use and what is

the range?

The system uses RF with operating frequency bands 2405 MHz to 2485 MHz (2.4 GHz). The

maximum transmission range is 50m.

FAQ

Advertising
This manual is related to the following products: