Greenheck BAPI Zone Pressure Touch (ZPT) Sensor - Manual

32215_ins_ZPT_SR_NT.pdf
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Fax+1-608-735-4804 • E-mail:[email protected] • Web:www.bapihvac.com
Zone Pressure Touch (ZPT) Sensor - Standard Range
Installation and Operation Instructions
rev. 05/09/2014
Specifications subject to change without notice.
Power:
7 to 40 VDC (4 to 20 mA Output)
7 to 40 VDC or 18 to 32 VAC (0 to 5 or 1 to 5 VDC Output)
13 to 40 VDC or 18 to 32 VAC (0 to 10 or 2 to 10 VDC Output)
Power Consumption:
20 mA max, DC only at 4 to 20 mA Output
4.9 mA max DC at 0 or 1 to 5 VDC or 0 or 2 to 10 VDC Output
0.12 VA max AC at 0 or 1 to 5 VDC or 0 or 2 to 10 VDC Output
Load Resistance:
4 to 20 mA Output 850 Ω Maximum @ 24 VDC
0 to 5 VDC or 0 to 10 VDC output 1KΩ minimum
Customer Editable Parameters:
Auto-Zero, Pressure Range, Output Range, & Display
Accuracy at 72°F: ±0.25% of range
Stability: ±0.25% F.S. per year
Environmental Operation Range: 32 to 140°F (0 to 60°C)
Storage Temperature: -40 to 203°F (-40 to 95°C)
Temperature Error: 0.01% FS/°F (0.02% FS/°C)
(±5.0” WC @ -4 to 140°F [-20 to 60°C])
Overpressure: Proof 27.68” WC (1 PSI),
Burst 41.52” WC (1.5 PSI)
Wiring: 2 wires (4 to 20mA Current loop)
3 wires (AC or DC powered, Voltage out)
LED: Blue power and Auto-Zero indicator
Connector: Removable 3-terminal plug, 12 to 28 AWG
Humidity: 0 to 95% RH, non-condensing
Port Connection: 1 High Pressure & 1 Low Pressure for
push-on 1/4” tubing (1/8 to 3/16” I.D.)
Enclosure Material: UV-resistant Polycarb., UL94, V-0
Enclosure Rating: IP66, NEMA 4
Mounting: Four external tabs with holes for #10 screws
Ranges: Imperial or metric units available through setup
Setup Buttons: 3-Waterproof capacitive touch through
cover; Left Arrow, Enter, Right Arrow
Display: 4-Digit, 0.368 Inch (9.4 mm) tall
Agency: CE, RoHS
BAPI’s “Touch” Pressure Sensor is an accurate, rugged and economical solution for measuring and reporting duct/
building static pressure, room-to-room
differential pressure or air velocities/
volumes. The heart of the unit is a
micro-machined silicon pressure
sensor with excellent accuracy,
repeatability and stability.
The touch interface allows for quick
and easy menu driven set up of all
parameters including auto zero,
pressure ranges, output ranges, W.C.
or Pascal operation, and display
format of pressure, percent output or
“On”. You can also use the interface to
create custom ranges by adjusting the
upper and lower pressure endpoints.
Product Identification
1 of 5
Specifications
Range Pressure Range Pressure Range Pressure Range Pressure
71 0 to 1.00 in W.C 76 ± 1.00 in W.C. 81 0 to 250 Pa 86 ± 250 Pa
72 0 to 2.00 in W.C. 77 ± 2.00 in W.C. 82 0 to 300 Pa 87 ± 300 Pa
73 0 to 2.50 in W.C 78 ± 2.50 in W.C. 83 0 to 500 Pa 88 ± 500 Pa
74 0 to 3.00 in W.C. 79 ± 3.00 in W.C. 84 0 to 1,000 Pa 87 ± 1,000 Pa
75 0 to 5.00 in W.C. 80 ± 5.00 in W.C. 85 0 to 1,250 Pa 90 ± 1,250 Pa
Table 1: Pressure Ranges
Inches Unit Pascal Unit
Fig. 1: Zone Pressure Touch (ZPT), Enclosure Open and Closed